I'm looking for your help now and i'm explaining what i figured out so far (and what i've allready tryed)
First of all my config file
Code: Select all
### Player Settings - for not walking/Attacking ###
attackAuto 0 ##i tryed to set the value to 2 to check if my homunculus attacks when i attack, but it was still was passiv
attackAuto_party 0
attackAuto_onlyWhenSafe 0
attackAuto_followTarget 1
attackAuto_inLockOnly 1
attackAuto_notInTown 1
attackDistance 1.5
attackDistanceAuto 0
attackMaxDistance 2.5
attackMaxRouteDistance 100
attackMaxRouteTime 4
attackMinPlayerDistance 2
attackMinPortalDistance 4
attackUseWeapon 1
attackNoGiveup 0
attackCanSnipe 0
attackCheckLOS 0
attackLooters 0
attackChangeTarget 1
aggressiveAntiKS 0
## not walking
route_escape_reachedNoPortal 1
[b]route_escape_randomWalk 0[/b]
route_escape_shout
route_avoidWalls 1
route_randomWalk 0
route_randomWalk_inTown 0
route_randomWalk_maxRouteTime 75
route_maxWarpFee
route_maxNpcTries 5
route_teleport 0
route_teleport_minDistance 150
route_teleport_maxTries 8
route_teleport_notInMaps
route_step 15
route_removeMissingPortals_NPC 1
route_removeMissingPortals 0
route_tryToGuessMissingPortalByDistance 1
route_reAddMissingPortals 1
######## Homunculus Support ########
homunculus_attackAuto 2
homunculus_attackAuto_party 2
homunculus_attackAuto_notInTown 1
homunculus_attackAuto_onlyWhenSafe 0
homunculus_attackDistance 20 ### was changing this value from 0 to 20 to see if anything changes but nothing at all
homunculus_attackMaxDistance 25 ### was reading in an post that i should set this value that high so it can attack distanc monsters better.
homunculus_attackMaxRouteTime 4
homunculus_attackCanSnipe 0
homunculus_attackCheckLOS 0
homunculus_attackNoGiveup 2
homunculus_attackChangeTarget 2
homunculus_followDistanceMax 10
homunculus_followDistanceMin 3
homunculus_route_step 15
homunculus_tankMode 1 ## just tryed this one to check if my homunculus attacks at least 1 time when i turn this on
homunculus_tankModeTarget Zenorc ## same
homunculus_runFromTarget 0
homunculus_runFromTarget_dist 6
homunculus_StandByAuto 0 ###tryed to change thisone aswell but without any result.
homunculus_teleportAuto_hp 10
homunculus_teleportAuto_maxDmg 500
homunculus_teleportAuto_maxDmgInLock 0
homunculus_teleportAuto_deadly 1
homunculus_teleportAuto_unstuck 0
homunculus_teleportAuto_dropTarget 0
homunculus_teleportAuto_dropTargetKS 0
homunculus_teleportAuto_totalDmg 0
homunculus_teleportAuto_totalDmgInLock 0
homunculus_teleportAuto_attackedWhenSitting 0
i tryed to delete everything and just write "all 1" in it and i also tryed to configure the settings to zenorcs spezific but without any result
at the next step i was checking the ai
i tryed to turn it on and off via consol command "homun ai off"/"homun ai on" but also without any result
what was suspicious for me wasthat when i tryped in the command "homun aiv" it says "ai_seq (auto) ="
The next thing i tryed was to change the homunculus ai at ...\src\AI\Slave\Homunculus.pm but also without any results.
can you guys please help me please? i reasureched some hours now and i was reading the manual but i think i missed something
i'm a german dude so im sorry if i missspelled or wrote in not propper english language
(i've also uploaded my config file without my account data if someone wants to check it that way)
The version im currently using is OpenKore what-will-become-2.1 ( version ctime:2018_02_01 )
thank you all for your help