Hi,
i have this problem that i cant resolve or search for the solution, it's about squelchDomains.
i ran a slave full support priest that always freeze everytime it passed through someone with autoafking and spaming skills.
so far, i have tried this on my config
verbose 0
showDomain 0
showDomain_NPC
showDomain_Shop list
squelchDomains system, playerList, player, guildnotice, npc, Load, console, connection, teleport, drop, attackedMiss, connection, load, parseMsg_statuslook, route, route_teleport, skill, success, plugins, route, map_event, npc, parseMsg/hairColor, parseMsgjob, parseMsg/upgrade, pet, portals, portalRecord, refine, success, syntax, ai_attact, useItem, selfSkill, selfSkills, map_event, npc, damage, monattack, attackmon, emotion, selfskill, partyskill, ai, ai_attack, ai_autoCart, ai_makeItem, ai_move, ai_npcTalk, attackMonMiss, autoBreakTime, connection, d_sendPacket, debug, drop, equipAuto, guild, ipc, Item, monsterSkill, npc, packetParser, parseInput, parseMsg, parseMsg_comboDelay, parseMsg_damage, parseMsg_move, parseMsg_presence, parseMsg_presence/name , parseMsg_presence/player, parseMsg_presence/remote, parseMsg_statuslook, parseSendMsg, pet, route, route_teleport, sendPacket, sitAuto, skill, storage, useTeleport, vending
verboseDomains
as you can see, i put down every known domainlist on the squelchdomain but the problem still persist, the console is still flooding with messages like these here and basically extremely lagging:
[Nov 05 00:03:35 2018.97] [100/100] Unknown #56067 attacks self (Dmg: 1) (Delay: 500ms)
[Nov 05 00:03:36 2018.19] [100/100] Unknown #57254 attacks self (Dmg: 1) (Delay: 500ms)
[Nov 05 00:03:36 2018.43] [100/100] Unknown #57359 attacks self (Dmg: Miss!) (Delay: 500ms)
[Nov 05 00:03:36 2018.65] [100/100] Monster Big Bell (2) attacks itself (Dmg: Miss!) (Delay: 500ms)
[Nov 05 00:03:36 2018.88] [100/100] Unknown #57353 attacks self (Dmg: Miss!) (Delay: 500ms)
[Nov 05 00:03:37 2018.10] [100/100] Monster Big Bell (0) attacks itself (Dmg: Miss!) (Delay: 500ms)
[Nov 05 00:03:37 2018.33] [100/100] Monster Big Bell (3) attacks itself (Dmg: Miss!) (Delay: 500ms)
is there any domain list that i missed to squelch those particular messages on console though?
or perhaps there is a way to speed up the console message so i wont lag behind?
please help thank you
squelchDomains not working
Moderator: Moderators
- fadreus
- The Kore Devil
- Posts: 708
- Joined: 17 Nov 2017, 23:32
- Noob?: No
- Location: Genting Highland, Malaysia
- Contact:
Re: squelchDomains not working
To know which domains printed, just set showDomain 1 & you can see which under what group.
http://openkore.com/index.php/SquelchDomains
http://openkore.com/index.php/VerboseDomains
Read the NOTES section on these 2 links above and then read down here:
http://openkore.com/index.php/Verbose
Then try:
Change verbose value as you see fit.
squelchDomains to hide.
verboseDomains to show.
Additionally, decrease sleepTime to see if it helps.
Other option is to use wxstart.exe instead of start.exe
I don't remember well but even if the messages are not printed, it still lag because of the packets.
I usually KS those auto-cast players or teleport away.
http://openkore.com/index.php/SquelchDomains
http://openkore.com/index.php/VerboseDomains
Read the NOTES section on these 2 links above and then read down here:
http://openkore.com/index.php/Verbose
Then try:
Change verbose value as you see fit.
squelchDomains to hide.
verboseDomains to show.
Additionally, decrease sleepTime to see if it helps.
Other option is to use wxstart.exe instead of start.exe
I don't remember well but even if the messages are not printed, it still lag because of the packets.
I usually KS those auto-cast players or teleport away.
iRO Supporter.
Read before you ask is the wisest thing human can do.
Unless you're a cat.
-
- Noob
- Posts: 4
- Joined: 02 Nov 2018, 02:15
- Noob?: Yes
Re: squelchDomains not working
IT WORKS!!!fadreus wrote:To know which domains printed, just set showDomain 1 & you can see which under what group.
http://openkore.com/index.php/SquelchDomains
http://openkore.com/index.php/VerboseDomains
Read the NOTES section on these 2 links above and then read down here:
http://openkore.com/index.php/Verbose
Then try:
Change verbose value as you see fit.
squelchDomains to hide.
verboseDomains to show.
Additionally, decrease sleepTime to see if it helps.
Other option is to use wxstart.exe instead of start.exe
I don't remember well but even if the messages are not printed, it still lag because of the packets.
I usually KS those auto-cast players or teleport away.
especially this one: Other option is to use wxstart.exe instead of start.exe,
i took off all the squelch from the list but the console refresh it sooo muchhh faster i didnt lag a bit like before, but just incase, i decrease the sleeptime to 2000 now.
THANK YOU VERY MUCH for your help.
i have 1 more problem, it's a wedding skill Undying Love, this is my slave sp config looks like:
useSelf_skill Undying Love {
lvl 1
target Master
target_sp < 80%
sp > 80%
timeout 15
notInTown 1
stopWhenHit 1
}
the problem is, it didnt follow the target_sp requirment, it doesnt matter what the target_sp percentage, it will use the skill when the slave sp meet the requirment sp > 80%, even when the target_sp is at 100%.
did i missed something with the skill block? i try to use the partyskill with the same setup, they both perform similar and didnt follow the target_sp requirment
please help, thanks a lot
- fadreus
- The Kore Devil
- Posts: 708
- Joined: 17 Nov 2017, 23:32
- Noob?: No
- Location: Genting Highland, Malaysia
- Contact:
Re: squelchDomains not working
Code: Select all
target_sp
It's not even in wiki nor default config file.
iRO Supporter.
Read before you ask is the wisest thing human can do.
Unless you're a cat.
-
- Noob
- Posts: 4
- Joined: 02 Nov 2018, 02:15
- Noob?: Yes
Re: squelchDomains not working
i see, i must have picked up somewhere , anyway, do you have any suggestion regarding the sp target requirment to fire up a skill like that? or it has to be done by macro??fadreus wrote:This condition never exist.Code: Select all
target_sp
It's not even in wiki nor default config file.
- fadreus
- The Kore Devil
- Posts: 708
- Joined: 17 Nov 2017, 23:32
- Noob?: No
- Location: Genting Highland, Malaysia
- Contact:
Re: squelchDomains not working
If you don't want to use macro, simply set your master to sit when sp lower than 80% and set your slave to give sp when your master statusActive Sitting.
Though you might get your slave to be confused if your master sit when hp is low.
Though you might get your slave to be confused if your master sit when hp is low.
iRO Supporter.
Read before you ask is the wisest thing human can do.
Unless you're a cat.
-
- Noob
- Posts: 4
- Joined: 02 Nov 2018, 02:15
- Noob?: Yes
Re: squelchDomains not working
interesting idea, never thought of it. i will give it a try, this "statusActive" might open up a few idea to play with.fadreus wrote:If you don't want to use macro, simply set your master to sit when sp lower than 80% and set your slave to give sp when your master statusActive Sitting.
Though you might get your slave to be confused if your master sit when hp is low.
thank you very much
Re: squelchDomains not working
use the doCommand pm "Slave" spme when SP less than wanted % with master and a macro with slave using the skill when receiving the pm spme and its easy solved