buyAuto arrow in geffen_in 30 178 NOT working

[jbron]

Hi Guys,

Please help me with my problem, my buyauto arrow is NOT working in geffen_in 30 178.
I'm always getting 'cannot calculate error'

Thanks in advance for helping me.

[benj1320]

update your portalLOS and portals.txt..

do this...

1. run your bot.. after logging in type "ai" to turn off openkores AI
2. type in again "ai" to turn it on manual mode.
3. type "move <x_coordinate_of_the_portal> <y_coordinate_of_the_portal>" to enter the portal for the bot to recognize it.
4. close your bot.... make sure the portal will be recompiled... http://wiki.openkore.com/index.php/PortalCompile

[jbron]

Hi,

Good day!

Thank you for your reply, I already followed your instructions...will let you know what will happen.

Once again, thank you very much!

[jbron]

update your portalLOS and portals.txt..

do this...

1. run your bot.. after logging in type "ai" to turn off openkores AI
2. type in again "ai" to turn it on manual mode.
3. type "move <x_coordinate_of_the_portal> <y_coordinate_of_the_portal>" to enter the portal for the bot to recognize it.
4. close your bot.... make sure the portal will be recompiled... http://wiki.openkore.com/index.php/PortalCompile

Hi,

Good day!

I still got the same error "cannot calculate" error.
I'm coming from mjolnir_07.
Please help me with this, thanks!

By the way, here's the config of my auto buy:

buyAuto arrow {
npc geffen_in 30 178
npc_steps
standpoint
distance 4
zeny >=5000
minAmount 900
maxAmount 10000
}

Thanks again for the help!

[krash]

update your portalLOS and portals.txt..

do this...

1. run your bot.. after logging in type "ai" to turn off openkores AI
2. type in again "ai" to turn it on manual mode.
3. type "move <x_coordinate_of_the_portal> <y_coordinate_of_the_portal>" to enter the portal for the bot to recognize it.
4. close your bot.... make sure the portal will be recompiled... http://wiki.openkore.com/index.php/PortalCompile

Try this again,

1. starting from mjolnir_07, place your character near the portal. (this will be the portal that the bot will use to go to geffen)

2. run your bot.. after logging in type "ai" to turn off openkores AI
3. type in again "ai" to turn it on manual mode.
4. type "move <x_coordinate_of_the_portal> <y_coordinate_of_the_portal>" to enter the portal for the bot to recognize it.
5. close your bot.... make sure the portal will be recompiled... http://wiki.openkore.com/index.php/PortalCompile

6. After compiling, CLOSE the BOT, manual relog your character using the RO client. Because you've used the move <x>, <y> earlier, your char should be in prt_fild00 or mjolnir_06, depending on which portal you've used.
7. On that current map, proceed to the NEXT portal that your bot will be using to go to geffen.(the portal to get to gef_fild00), log out.

8. run your bot.. after logging in type "ai" to turn off openkores AI
9. type in again "ai" to turn it on manual mode.
10. type "move <x_coordinate_of_the_portal> <y_coordinate_of_the_portal>" to enter the portal for the bot to recognize it.
11. close your bot.... make sure the portal will be recompiled... http://wiki.openkore.com/index.php/PortalCompile

12. After compiling, CLOSE the BOT, manual relog your character using the RO client. Because you've used the move <x>, <y> earlier, your char should be in gef_fild00
13. On that current map, proceed to the NEXT portal that your bot will be using to go to geffen. log out.

14. run your bot.. after logging in type "ai" to turn off openkores AI
15. type in again "ai" to turn it on manual mode.
16. type "move <x_coordinate_of_the_portal> <y_coordinate_of_the_portal>" to enter the portal for the bot to recognize it.
17. close your bot.... make sure the portal will be recompiled... http://wiki.openkore.com/index.php/PortalCompile

Your bot should now have a complete path from geffen to mjolnir_07 in its portals.txt.

Lasty, make sure you press 0 when asked if new portals should be compiled.

[akosisai]

I have the same experience, I can't make a way to buy from that shop, one of the probable reason is that the NPC location is not actually walkable, try to set a lockmap and its coordinates which is not walkable, the kore will ignore it and remove the lockmap from your config automatically.