Openkore.com

[Philippines - pRO: New Loki]
ip 202.57.117.94
port 6900
master_version 15
version 1
secureLogin 1
secureLogin_type 0
secureLogin_requestCode
secureLogin_account 0
serverType pRO
patchserver wpatch.ragnarok.com.ph
patchpath /patch50
storageEncryptKey 0x050B6F79, 0x0202C179, 0x0E20120, 0x04FA43E3, 0x0179B6C8, 0x05973DF2, 0x07D8D6B, 0x08CB9ED9
serverEncoding Tagalog
charBlockSize 112
gameGuard 1
recvpackets recvpackets-valkyrie.txt
addTableFolders pRO

Have'nt done much testing yet I am busy with work. Inform me if you have problems here.

You can use the unpacked valexe.exe I posted here and hex the codes there and rename it to lokiexe.exe

Edit: these settings have been committed to SVN so just download the latest SVN from http://openkore.collectskin.com/

Mine was already connected to the server, but after a few seconds it gets disconnected.

It gets some sort of this message "Disconnecting from map Server..."

Do you have the correct recvpackets?

where will i put this codes? sorry im noob

am not that really good at configure kore,,but should the line:

"recvpackets recvpackets-valkyrie.txt"

be placed??

is there packets for new loki??

Tried putting the code on the server.txt and changed "master Philippines - pRO: New Loki" on the config.txt, the problem is that whenever I run the openkore the screen below appears. Thanx for the help.

--------- Servers ----------
# Name Users IP Port
0 New Loki 1264 202.57.117.96 5000
-------------------------------
Closing connection to Account Server
Disconnecting (202.57.117.94:6900)...disconnected
Server 0 selected
Connecting to Character Server...
Connecting (202.57.117.96:5000)... connected
Received characters from Character Server
There are no characters on this account.
------------ Character selection ------------
# Choice
0 Create a new character
------------------------
Please choose a character or an action.
---------------------------------------------
Enter your answer:

yeahitsanton wrote:where will i put this codes? sorry im noob

yeahitsanton, You can find the servers.txt file inside your tables folder.

3173yaelelie wrote:am not that really good at configure kore,,but should the line:
"recvpackets recvpackets-valkyrie.txt"
be placed??
is there packets for new loki??

3173yaelelie, New Loki uses the same packets as Valkyrie.

SYAORAN wrote:Tried putting the code on the server.txt and changed "master Philippines - pRO: New Loki" on the config.txt, the problem is that whenever I run the openkore the screen below appears. Thanx for the help.

--------- Servers ----------
# Name Users IP Port
0 New Loki 1264 202.57.117.96 5000
-------------------------------
Closing connection to Account Server
Disconnecting (202.57.117.94:6900)...disconnected
Server 0 selected
Connecting to Character Server...
Connecting (202.57.117.96:5000)... connected
Received characters from Character Server
There are no characters on this account.
------------ Character selection ------------
# Choice
0 Create a new character
------------------------
Please choose a character or an action.
---------------------------------------------
Enter your answer:

SYAORAN, Do you have a character in the server? Please remember to remake your config from scratch when you are having problems.

I ran a 10 min test of openkore in New Loki and had no problems. I used the latest SVN from http://openkore.collectskin.com/

sir, why is it that it always direct me in valkyrie server?
have i been missing something here?

thank you so much in advance..

drayl012 wrote:sir, why is it that it always direct me in valkyrie server?
have i been missing something here?

thank you so much in advance..

Are you sure you put in the correct info in your servers.txt? Try and remake your config.txt from scratch and see if it will work.

thanks.. it works..
your a great help dude..)

hello~

first of all, thanks for sharing those information. anyway, i've got a few questions myself:

1. so i copied all that was presented above, arranged it in such a way that there are no spaces in between the characters "e.g. [Philippines - pRO: New Loki]ip 202.57.117.94port 6900" etc etc, and then put it in the servers.txt. After that, I modified the config.txt to include the loki server in there, and then executed the wxstart.exe.
how come i'm still getting this problem?

mind you. i tried pasting what the topic started said in every place possible in the servers.txt, but i still got the same results. i even tried running start.exe

2. i have a working hexed valkyrie.exe client which i used when i was dual-clienting/botting at the same time. the thing is, i tried to rename that to "new_loki.exe, new_loki, lokiexe.exe, and lokiexe". However, when i tried to run that, all I got was the valkyrie server. I was even able to log into that server using my account, but no new loki or whatsoever..

can anyone help me with the two please? thanks~


edit:
as for #1. i tried experimenting with servers.txt, even to the point of deleting everything in it and leaving what you guys posted above (in the first post). i got this problem: Required server options are not set: serverType
as for #2. okay, it seems that i was tweaking with the wrong file. i was renaming the patcher, not the .exe thingy. anyway, i went on with renaming valexe.exe to lokiexe.exe. problem is, when i run the patcher and start the game (the gameguard doesn't appear this time), i get this "attempt to call a nil value" error box. got any ideas with that?

edit:
SCRATCH NO.1. I was able to run the bot. It's just that, I wasn't able to paste the text properly. Basically, I removed the paragraphs~ I'm kinda able to bot now.
Only that my 2nd problem isn't solved yet~ xD