"xKore 1" doesn't work now
Moderators: Moderators, Developers
"xKore 1" doesn't work now
Server:twRO
all twRO server can't use xKore 1 Mode
It will stuck at connecting map server
I tried change serverType but still not work
The login picture before select server now is OFF
and Openkore still work, just "xKore 1" doesn't work
all twRO server can't use xKore 1 Mode
It will stuck at connecting map server
I tried change serverType but still not work
The login picture before select server now is OFF
and Openkore still work, just "xKore 1" doesn't work
Re: "xKore 1" doesn't work now
Excuse me. What is "hexed" mean?rwnath wrote:Is your client hexed?
Re: "xKore 1" doesn't work now
if the client is hexed. that means you cannot use xkore?rwnath wrote:Is your client hexed?
-
- The Way Of Human
- Posts: 194
- Joined: 03 Nov 2010, 05:50
- Noob?: No
- Location: The Philippines
- Contact:
Re: "xKore 1" doesn't work now
you can only use xkore if your client is hexed.valk123 wrote:if the client is hexed. that means you cannot use xkore?rwnath wrote:Is your client hexed?
Hexed meaning, gameguard is disabled
-
- Developers
- Posts: 1798
- Joined: 05 Dec 2008, 05:42
- Noob?: Yes
Re: "xKore 1" doesn't work now
"Modified" is more related.rwnath wrote:Hexed meaning, gameguard is disabled
Re: "xKore 1" doesn't work now
i am testing these days...
seems to be the client problem.
seems to be the client problem.
XKore mode freeze when choosing map server (twRO)
i have tested but still dont get it..
XKore mode should let the RO client do the disconnect char server so the serverDisconnect() do nothing in this mode,
but seems the client is not disconnecting or connecting to map server correctly.
Now the situation is:
after choosing char, it should be connecting map server
but openkore console shows just listed the map server ip and port, char id but not going anymore.
i don think it is the servertype0 problem but the xkore.pm is not supporting renewal or the client binary is changed. I need more information on xkore mode. thankyou
XKore mode should let the RO client do the disconnect char server so the serverDisconnect() do nothing in this mode,
but seems the client is not disconnecting or connecting to map server correctly.
Now the situation is:
after choosing char, it should be connecting map server
but openkore console shows just listed the map server ip and port, char id but not going anymore.
i don think it is the servertype0 problem but the xkore.pm is not supporting renewal or the client binary is changed. I need more information on xkore mode. thankyou
Re: XKore mode freeze when choosing map server (twRO)
I have the same situation ! It disconnected after select char.
Re: "xKore 1" doesn't work now
I use Xkore 1 with non-hexed RO client to twRO.valk123 wrote:if the client is hexed. that means you cannot use xkore?rwnath wrote:Is your client hexed?
But it disconnected after selecting the char....., and then the RO client freeze !
Dosen't the "XKore 1" support the renewal ?