AI somehow gets "stucked" after casting Kyrie Eleison

khinz27 · **Joined:** 20 Nov 2010, 23:16 **Posts:** 1

Hi!Im not sure if this is smart enough to deserve any replies,but I experienced this problem when I made a macro that makes my FS Priest cast Blessing,Increase Agi,Kyrie Eleison and Impositio Manus upon emotion..

do sp 34 $target
do sp 29 $target
pause 1.7
do sp 73 $target
pause 3.5
do sp 66 $target

After casting Kyrie eleison to the target,the bot doesn't do anything,even if i tried to type manual commands like sp 66 1,it will only work again after i type "ai clear" in the console..The cycle just repeats after it casts Kyrie Eleison..Some will say that it may be due to the mid delay,but then isn't it that when you cast during Mid-delay,something will appear in the console that says that "skill failed Mid delay" or something like that..But in my case,you can't see anything like that..

rwnath · **Posted:** 16 Dec 2010, 22:04

why not try adding "do ai clear" on the macro? Just a thought

EternalHarvest · **Joined:** 05 Dec 2008, 05:42 **Posts:** 1853

viewtopic.php?t=2079

Post output of "aiv" and "ai print" after casting Kyrie from the macro?

cloudkills · **Joined:** 10 Apr 2011, 22:49 **Posts:** 1

Didn't really want to bump up an old thread but I got this same problem. It fixed when i do ai clear but it's not letting me do it from within a macro.

Code:

[macro] BuffViaFlag.call error: error in 11: error in 11: do not mess around with ai in macros

Before using kyrie:

Code:

ai_seq (manual) = 
Active tasks: RaiseStat, RaiseSkill
Inactive tasks: -
------ AI Sequence ---------------------
------ AI Sequences --------------------

After using it once:

Code:

ai_seq (manual) = 
Active tasks: RaiseStat, RaiseSkill, UseSkill
Inactive tasks: -
------ AI Sequence ---------------------
------ AI Sequences --------------------

Build up of inactive tasks when it doesn't work:

Code:

ai_seq (manual) = 
Active tasks: RaiseStat, RaiseSkill, UseSkill
Inactive tasks: UseSkill, UseSkill, UseSkill
------ AI Sequence ---------------------
------ AI Sequences --------------------

EternalHarvest · **Joined:** 05 Dec 2008, 05:42 **Posts:** 1853

So the problem is that UseSkill stucks...

savior14 · **Joined:** 18 Jun 2011, 23:44 **Posts:** 2

config.txt

Code:

macro_nowarn 0
macro_orphans reregister_safe
macro_file macros.txt

timeouts.txt

Code:

macro_delay 1

macros.txt

Code:

automacro am_buff2 {
   pm /buf/i
   call doBuff2
}

macro doBuff2 {
   $name = $.lastpm
   log $name
   
   #do sp "Blessing" $name 10
   do sp 34 $name 10
   log Done Blessing
   
   # do sp "Increase AGI" $name 10
   do sp 29 $name 10
   log Done Increase AGI
   pause 1.5
   
   # do sp "Kyrie Eleison" $name 10
   do sp 73 $name 10
   log Done Kyrie Eleison
   pause 1.5
   
   # do ss "Angelus" 10
   do ss 33 10
   log Done Angelus
   pause 1
   
   # do ss "Magnificat" 5
   do ss 74 5
   log Done Magnificat
   pause 2
   
   # do sp "Impositio Manus" $name 4
   do sp 66 $name 4
   log Done Impositio Manus
   pause 1
}

Buff sequence

Code:

Blessing
Inc AGI
Kyrie
Angelus
Magnificat
Impositio

>> Open the bot program >> pm the buffer (1st pm)

Code:

(From: SalogelX) : |00buf
[macro] automacro am_buff2 triggered.
[macro log] SalogelX
You are now: EFST_POSTDELAY (Duration: 0.54s)
You use Blessing on Player SalogelX (17) (Lv: 10)
You are no longer: EFST_POSTDELAY
[macro log] Done Blessing
You are casting Increase AGI on Player SalogelX (17) (Delay: 53ms)
You are now: EFST_POSTDELAY (Duration: 0.7s)
You use Increase AGI on Player SalogelX (17) (Lv: 10)
[macro log] Done Increase AGI
You are no longer: EFST_POSTDELAY
You are casting Kyrie Eleison on Player SalogelX (17) (Delay: 894ms)
[macro log] Done Kyrie Eleison
You are now: EFST_POSTDELAY (Duration: 1.35s)
Player SalogelX (17) uses Kyrie Eleison on himself (Lv: 10)
You are no longer: EFST_POSTDELAY
[macro log] Done Angelus
[macro log] Done Magnificat
[macro log] Done Impositio Manus

as you can see, only Bless, Agi, and Kyrie are executed. the rest doesnt.

>> pm the buffer (2nd pm)

Code:

(From: SalogelX) : |00buf
[macro] automacro am_buff2 triggered.
[macro log] SalogelX
[macro log] Done Blessing
[macro log] Done Increase AGI
[macro log] Done Kyrie Eleison
[macro log] Done Angelus
[macro log] Done Magnificat
[macro log] Done Impositio Manus

here, automacro executed but none of the spell executes. Please point out what's wrong in my config.
Thanks!

savior14 · **Joined:** 18 Jun 2011, 23:44 **Posts:** 2

Thanks for the link. So i guess the problem still not yet resolved. Or should it mean not to use Kyrie Eleison.

do ai clear in macro throws an error.

bangdoll02 · **Joined:** 28 May 2010, 05:24 **Posts:** 3

Using r7856,
It is not only the kyrie problem ( I have not test it in my bot , maybe fixed in my version)
I have the same issue in casting manhole. No message for the fail in casting.
Only ai clear could enable the casting again.

For other location skills like warping , its fine. Message like unable to cast will pop.

Maybe we should discuss more in this thread.

EternalHarvest · **Joined:** 05 Dec 2008, 05:42 **Posts:** 1853

bangdoll02 wrote:

I have the same issue in casting manhole. No message for the fail in casting.

Kyrie didn't actually fail, it was casted successfully but ai got stuck right after that.

bangdoll02 · **Joined:** 28 May 2010, 05:24 **Posts:** 3

EternalHarvest wrote:

bangdoll02 wrote:

I have the same issue in casting manhole. No message for the fail in casting.

Kyrie didn't actually fail, it was casted successfully but ai got stuck right after that.

Refer to savior14 situation, it's the same as mine.
I cast the first manhole manually. Every castings afterward show nothing although they actually fails.
I have no direction on fixing this. Any suggestion？

Openkore.com

AI somehow gets "stucked" after casting Kyrie Eleison

Who is online