Page 2 of 9
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 24 Jul 2014, 17:53
by onionkute
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 25 Jul 2014, 15:43
by 4epT
onionkute, you have a record "082D -1" - it means the correct file.
likely error in serverType. You must use RagexeRE_2011_08_16a or higher..
But this is offtopic!!!
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 26 Jul 2014, 03:08
by onionkute
I'm pretty sure I got the right serverType, but let me check it again. Thank you so much
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 21 Aug 2014, 13:07
by masue0
after klicking start analyzer
i faced a problem like this
extract packet len failed to find PACKET_CZ_ENTER
sry for small pict
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 21 Aug 2014, 22:08
by genskull
this also happened to me.
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 22 Aug 2014, 03:24
by 4epT
masue0, genskull
likely that your file is packed by an external program
Re: Usage: Packet Extractor v3
Posted: 06 Sep 2014, 18:57
by bipolarbear
Got this error. o_o Dont quite know what im doing wrong, i used the right client.exe
"ExtractPacketLen: Failed at first set"
http://imgur.com/9SxLl8G
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 12 Sep 2014, 02:15
by sakura141
I get Packet Tokenizer: Unknown switch: 082D error
can you help me extract this sir ?
http://depositfiles.com/files/ocpt9cgha
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 14 Sep 2014, 15:59
by 4epT
it does not applies to the topic!
Re: Usage: Packet Extraction Evaluation Kit (PEEK)
Posted: 16 Sep 2014, 12:47
by masterbrasil
4epT wrote:masue0, genskull
likely that your file is packed by an external program
I'm having the same problem as the two in this case have any solutions? Any other way of doing the extraction? Thank you.
http://www.mediafire.com/download/cw09s ... Ragexe.exe
Edit: I did unpack the exe following this tutorial
https://www.youtube.com/watch?v=-Cg6KPMFOG0 .Using Ollydbg and ImpREC., is now giving the following error: ExtractPacketLen: Failed at second walkthrough.