cannot select another character

All resolved question will be found here. It is recommended that you browse / search through this section first and see if your question has been answered before

Moderators: Moderators, Documentation Writers

Locked
Message
Author
mrbrazil
Human
Human
Posts: 27
Joined: 21 Nov 2010, 20:04
Noob?: Yes

cannot select another character

#1 Post by mrbrazil »

hi po. first time ko lang po mag bot.... actually ngayon ko lang na try...

yung question ko lang po eh hindi ako makapagpalit ng character... may nakita din akong kagaya nung sa iba na may mga novice dun sa list na characters... inignore ko po yun since yung nasa first ng list eh ninja, eh meron naman ako nun... so ngayon nakabot na yung ninja..

ang problema ko po ngayon tuwing gagamitin ang start.exe laging yung ninja yung nakabot... hindi na humihingi ng log-in at character select... paano po ba magswitch ng character?
Top
denz1208
Noob
Noob
Posts: 12
Joined: 13 Oct 2010, 22:14
Noob?: Yes

Re: cannot select another character

#2 Post by denz1208 »

click mo program tapos select mo ung character select.
Top
mrbrazil
Human
Human
Posts: 27
Joined: 21 Nov 2010, 20:04
Noob?: Yes

Re: cannot select another character

#3 Post by mrbrazil »

eh kapag ginagamit naman ang start.exe eh wala namang interface... command prompt lang to ahhh.... may ilalagay paba para magka-GUI?
Top
benj1320
Moderators
Moderators
Posts: 403
Joined: 25 Aug 2008, 14:56
Noob?: No
Location: CyberOne Building , Eastwood
Contact:
Contact benj1320

Re: cannot select another character

#4 Post by benj1320 »

config.txt, under your account info block (user / password / server) ... remove the value of char
then save.. and run your bot... look for the character you want to bot.. then select the index/slot number of the character.
“The moon shines to both guilty and innocent alike..”
The Openkore Manual---Global Forum Rules--The Template
Top
mrbrazil
Human
Human
Posts: 27
Joined: 21 Nov 2010, 20:04
Noob?: Yes

Re: cannot select another character

#5 Post by mrbrazil »

pasensya na po talaga ah...

pag ginagawa kong 0 ung value may lumalabas na list pero mga novice...

nakita ko sa ibang thread yung dapat gawin dun... yung tungkol sa servers.txt pero wala dun sa list ang valkyrie.... lalagay ko sana pic pero ayaw ma-attach

pa help lang po...
Top
rebilyazaki
Noob
Noob
Posts: 5
Joined: 19 Nov 2010, 23:49
Noob?: Yes

Re: cannot select another character

#6 Post by rebilyazaki »

mrbrazil wrote:eh kapag ginagamit naman ang start.exe eh wala namang interface... command prompt lang to ahhh.... may ilalagay paba para magka-GUI?
you should try WX interface you can download it at http://misc.openkore.com/

am sure you'll love it haha
Top
benj1320
Moderators
Moderators
Posts: 403
Joined: 25 Aug 2008, 14:56
Noob?: No
Location: CyberOne Building , Eastwood
Contact:
Contact benj1320

Re: cannot select another character

#7 Post by benj1320 »

mrbrazil wrote:nakita ko sa ibang thread yung dapat gawin dun... yung tungkol sa servers.txt pero wala dun sa list ang valkyrie.... lalagay ko sana pic pero ayaw ma-attach
thats impossible. how come you can connect to the server without the server block of valkyrie in servers.txt :)) ..

read my reply here http://forums.openkore.com/viewtopic.ph ... 7&start=10
“The moon shines to both guilty and innocent alike..”
The Openkore Manual---Global Forum Rules--The Template
Top
mrbrazil
Human
Human
Posts: 27
Joined: 21 Nov 2010, 20:04
Noob?: Yes

Re: cannot select another character

#8 Post by mrbrazil »

thanks po sa reply... wx po gamit ko. naga-appear na rin sa list yung ibang characters... ang kailangan na lang ayusin ehh yung automatic na yung ninja ang run ng program... di na nagtatanong kung ano ang gusto piliing character...
Top
mrbrazil
Human
Human
Posts: 27
Joined: 21 Nov 2010, 20:04
Noob?: Yes

Re: cannot select another character

#9 Post by mrbrazil »

ay ok na po yung character selection... thanks po sa pasensya nyo....
Top
Locked

Return to “Resolved Questions”