heRO 2018 - Timeout on Map server.
Moderator: Moderators
-
- Noob
- Posts: 6
- Joined: 21 Feb 2018, 02:15
- Noob?: Yes
heRO 2018 - Timeout on Map server.
Hello there,
I have recently been trying to bot on the server heRO http://www.hero-server.net/
I have attempted the suggestions from this post that was posted quite a few years ago, http://forums.openkore.com/viewtopic.php?f=7&t=211288
and even included the fix that SkylorD has given but to no avail.
However, I am still getting the issue where Openkore connects to the server but times out on the Map Server as seen from the attachment I have put on this post.
I have also included my servers.txt as the IP address for the server has been updated since then.
Please do let me know how I can go about to remedy this situation.
Thank you!
I have recently been trying to bot on the server heRO http://www.hero-server.net/
I have attempted the suggestions from this post that was posted quite a few years ago, http://forums.openkore.com/viewtopic.php?f=7&t=211288
and even included the fix that SkylorD has given but to no avail.
However, I am still getting the issue where Openkore connects to the server but times out on the Map Server as seen from the attachment I have put on this post.
I have also included my servers.txt as the IP address for the server has been updated since then.
Please do let me know how I can go about to remedy this situation.
Thank you!
- Attachments
-
- servers.txt
- servers.txt
- (13.49 KiB) Downloaded 442 times
-
- Developers
- Posts: 235
- Joined: 09 Apr 2017, 07:23
- Noob?: No
- Location: Thailand
Re: heRO 2018 - Timeout on Map server.
packet key :p
-
- Noob
- Posts: 6
- Joined: 21 Feb 2018, 02:15
- Noob?: Yes
Re: heRO 2018 - Timeout on Map server.
Thanks for your reply man.sctnightcore wrote:packet key :p
I have noticed that packet key part as originally posted by roplayer 34 saying:
But I have no real idea as to what I should do with this information nor where do I put it. Would you mind giving me a hand by telling me what this information does (if it isn't too much of a hassle) and also how I can incorporate it into Openkore. Or if you know where I can find the information to learn about fixing this in my openkore.From the revpackets: #packet_key: 0x16cf3301 0x1f472b9b 0x0b4a3cd2
I've tried looking it up but always swing back to this page,
http://openkore.com/index.php/Packet_Length_Extractor
which I don't believe has the right information I'm looking for in this issue.
Thanks again for your reply mate!
-
- Developers
- Posts: 235
- Joined: 09 Apr 2017, 07:23
- Noob?: No
- Location: Thailand
Re: heRO 2018 - Timeout on Map server.
get from peek !
-
- Noob
- Posts: 6
- Joined: 21 Feb 2018, 02:15
- Noob?: Yes
Re: heRO 2018 - Timeout on Map server.
Thanks again for your reply man.sctnightcore wrote:get from peek !
I've downloaded PEEK and followed steps in this page,
http://forums.openkore.com/viewtopic.php?f=6&t=207278
But it seems that I still can't get the right solution, while using the PEEK from
https://github.com/MStr3am/PEEK
I get an error saying "Packet Length Extractor could not be run"
Whereas when I used the other one,
https://github.com/ThemonChan/PEEK
It runs but nothing happens, then I tried entering the code,
and saving it as recvoutput.pl but when I move it to the Output folder and "run" it, it just opens as a notepad file. and I don't get toCode: Select all
#!/usr/bin/env/perl use strict; use warnings; package iwant_myrecvpackets; my %packets; &start(); sub start { &main(); system("pause"); } sub main { my ($message, $file, $input, $output, $files, $found) = 0; $found = -1; foreach (<*>) { $files .= $_."\n"; if (-d $_ && $_ =~ /^Output$/ig) { $found = 1;}; } if ($files =~ /(recvpackets.+\.ini)/ig) { #$message = "Type 1 from ThemonChan.\n"; $file = $1; } elsif ($files =~ /(packetlengths.+\.ini)/ig) { #$message .= "Type 2 from MrStr3am\n"; $file = $1; } elsif (substr(Win32::GetCwd(), eval (length(Win32::GetCwd()) - 6), length(Win32::GetCwd()) ) ne 'Output') { $message = "\nDo you have sure this file is inside \'Output\' folder?\n"; if ($found eq 1) { #If we aren't inside output folder, we could be on root, check for existance! $message .= "Please bro, move this script to \'Output\' folder! I can see it\n"; } } else { $message = "\nPlease, start PEEK first to extract recvpackets initial file.\nThen run this script again.\nIf you've already done it, Try asking on OK forum\n"; } if (substr(Win32::GetCwd(), eval (length(Win32::GetCwd()) - 20), length(Win32::GetCwd()) ) !~ /([P][E][E][K]([-]?[m][a][s][t][e][r])?)|ThemonChan|MrStr.am/ig) { $message .= "Please, move this script to PEEK/Output folder!\n"; } goto end if ($message); open $input, "<$file" or $message = "Can't open the input file\n"; open $output, ">recvpackets.txt" or $message = "Can't create recvpackets output file\n"; goto end if ($message); read_lines($input); get_output($output); close_handles($input, $output); end: printf("Length = %d packets\nPackets were extracted with success...\n", eval(keys %packets)) if (!$message); printf("Errors:%d\n%s\n", eval($message && 1), $message) if ($message); return 1; } sub close_handles { my ($dw1, $dw2) = @_; close($dw1); close($dw2); return 1; } sub read_lines { my $file = shift; my ($lines, $packetid); while (<$file>) { $lines = $_; if ($lines =~ /0x(0...) = ((-)?\d+)/ig) { undef $packetid; $packetid = uc($1); if (!exists($packets{$packetid})) { $packets{$packetid} = $2; } } } return 1; } sub get_output { my $file = shift; foreach my $value (sort keys %packets) { print $file "$value $packets{$value}\n"; } return 1; } 1;
Is there something else that I'm missing?8. file will appear: recvpackets.txt
-
- Developers
- Posts: 235
- Joined: 09 Apr 2017, 07:23
- Noob?: No
- Location: Thailand
Re: heRO 2018 - Timeout on Map server.
download perl
-
- Noob
- Posts: 6
- Joined: 21 Feb 2018, 02:15
- Noob?: Yes
Re: heRO 2018 - Timeout on Map server.
Sorry but if you don't mind me asking, where do I find perl?sctnightcore wrote:download perl
I mean I've searched forum after forum to find a solution for this >.>
Thanks again for your reply.
- fadreus
- The Kore Devil
- Posts: 708
- Joined: 17 Nov 2017, 23:32
- Noob?: No
- Location: Genting Highland, Malaysia
- Contact:
Re: heRO 2018 - Timeout on Map server.
nelsvoon27 wrote:Sorry but if you don't mind me asking, where do I find perl?
iRO Supporter.
Read before you ask is the wisest thing human can do.
Unless you're a cat.
-
- Noob
- Posts: 6
- Joined: 21 Feb 2018, 02:15
- Noob?: Yes
Re: heRO 2018 - Timeout on Map server.
Well thanks for the replies. Doubt I'd make it so ggz. Gonna just forget it.
Thanks again guys.
Thanks again guys.
Re: heRO 2018 - Timeout on Map server.
i can help you