Ok, so I have my bot set to automatically go to storage when its overweight, using the block below:
storageAuto 1
storageAuto_npc pay_arche 55,123
storageAuto_distance 5
storageAuto_npc_type 1
storageAuto_npc_steps c r1 n
storageAuto_password
storageAuto_keepOpen 0
storageAuto_useChatCommand
relogAfterStorage 1
minStorageZeny 50
However, kore tells me "invalid npc information" whenever i try the "autostorage" command to test it. My npcs.txt has this kafra in it, I don't understand what the problem is. Any help would be appreciated!
Auto Storage Invalid npc data
Moderator: Moderators
Re: Auto Storage Invalid npc data
I had that issue while trying to use the Kafra in Payon. Even though the bot was being sent to the correct NPC, a check of openkore showed that it could identify that NPC properly, and that teh location in the config.txt was correct, I was still getting that "invalid NPC data".
I'm not sure if it's the proper way to fix it, but I only changed one thing: storageAuto_npc_type 2
Mine reads like this:
I don't know what "storageAuto_npc_steps" actually does, but I don't seem to need to use it.
I'm not sure if it's the proper way to fix it, but I only changed one thing: storageAuto_npc_type 2
Mine reads like this:
Code: Select all
storageAuto 1
storageAuto_npc payon 181, 104
storageAuto_distance 5
storageAuto_npc_type 2
storageAuto_npc_steps
storageAuto_password
storageAuto_keepOpen 0
storageAuto_useChatCommand
relogAfterStorage 1
minStorageZeny 500
Re: Auto Storage Invalid npc data
I tried changing it to type 2, but it still gives me the same error. I also changed the min storage zeny to 500 (since that how much it costs to use npc in valk) still nothing though. the steps tell Kore how to answer the npc, but i think you only need that if its a unique npc. I put it in just in case, tried it without as well. Nothin. Any help would be greatly appreciated!
Re: Auto Storage Invalid npc data
Figured it out. it was the spacing/comma in the coordinates. removed the comma. works fine. T.T how foolish of me
-
- Human
- Posts: 30
- Joined: 22 Dec 2008, 13:39
- Noob?: No
- Location: The nearest computer
Re: Auto Storage Invalid npc data
NPCtype is a property that defines various types of kafra employees present all over Rune Midgard.meaculpa wrote:I had that issue while trying to use the Kafra in Payon. Even though the bot was being sent to the correct NPC, a check of openkore showed that it could identify that NPC properly, and that teh location in the config.txt was correct, I was still getting that "invalid NPC data".
I'm not sure if it's the proper way to fix it, but I only changed one thing: storageAuto_npc_type 2
Mine reads like this:
I don't know what "storageAuto_npc_steps" actually does, but I don't seem to need to use it.Code: Select all
storageAuto 1 storageAuto_npc payon 181, 104 storageAuto_distance 5 storageAuto_npc_type 2 storageAuto_npc_steps storageAuto_password storageAuto_keepOpen 0 storageAuto_useChatCommand relogAfterStorage 1 minStorageZeny 500
For example, the Kafra employees at dungeons and islands, such as Orc Dungeon, Byalan Dungeon etc don't provide facility to save your respawn point.
Kore also needs to know which is the Option # to be chosen when talking to a certain NPC. For instance, when your bot is supposed to autostorage, NPCTYPE will decide, whether Option #1 is Use Storage, or Option #2 is...
Ex-inRO Player™