X Kore problem on Valk Server

International

Moderator: Moderators

Message
Author
Major Marks
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 09:05
Noob?: No

X Kore problem on Valk Server

#1 Post by Major Marks »

i seem to be unable to run x kore and watch my bot through the client. ive changed the client from Ragexe.exe to RagFree.exe as needed, but after that it says there's a problem with NetRedirect.dll.


# 1 = hook into RO client, 2 = Act as stand-alone proxy, proxy = act as true proxy
XKore 1
XKore_silent 1
XKore_bypassBotDetection 0
XKore_exeName RagFree.exe

on the p2p servers i was able to set it up fine with this same setup minus RagFree.exe being ragexe.exe. am i retarded and simply dont understand what NetRedirect.dll is or is this a problem with the f2p server and kore? tnks!

bahng
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 19:50
Noob?: Yes

Re: X Kore problem on Valk Server

#2 Post by bahng »

Use SVN version
http://openkore.collectskin.com/

works fine here.

Major Marks
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 09:05
Noob?: No

Re: X Kore problem on Valk Server

#3 Post by Major Marks »

Oddly enough, I am using the SVN version. I'll try redownloading it though, thanks.

*Edit*

Redownloaded the SVN Version, still having the same problem.

Image


master International - iRO: Valkyrie
server
username xxxxxx
password xxxxxx
loginPinCode
char
sex

bindIp
# For an overview of all servertypes please go to the following URL:
# http://www.openkore.com/wiki/index.php/ ... pe#English
serverType 0

# 1 = hook into RO client, 2 = Act as stand-alone proxy, proxy = act as true proxy
XKore 1
XKore_silent 1
XKore_bypassBotDetection 0
XKore_exeName RagFree.exe

# XKore 2 / Proxy configuration
XKore_listenIp 127.0.0.1
XKore_listenPort 6901
XKore_publicIp 127.0.0.1

# It is not advised to set secureAdminPassword if you're using Xkore 2
secureAdminPassword 1
adminPassword jalesail
callSign
commandPrefix ;

Is it actually working for you, because it isn't for me. It is working for me on chaos, loki, and iris though.
Attachments
wut.jpg

bahng
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 19:50
Noob?: Yes

Re: X Kore problem on Valk Server

#4 Post by bahng »

My settings are basically the same as yours...

Here is the direct link to the svn version I use.
http://openkore.collectskin.com/openkore_ready.zip

Major Marks
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 09:05
Noob?: No

Re: X Kore problem on Valk Server

#5 Post by Major Marks »

Still isn't working, and I tried redownloading the xtools too. :\

bahng
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 19:50
Noob?: Yes

Re: X Kore problem on Valk Server

#6 Post by bahng »

I redownloaded from the link above and I get the same error as you for some reason.

Anyway if you're desperate you can use this one which is working for me. Rar'd and upload it myself. Just add the fields folder.
http://rapidshare.com/files/151366975/0penkore.rar.html

khalim
Noob
Noob
Posts: 2
Joined: 26 Jul 2008, 01:59
Noob?: No

Re: X Kore problem on Valk Server

#7 Post by khalim »

netredirect.dll missing...isn't it kinda obvious?

Major Marks
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 09:05
Noob?: No

Re: X Kore problem on Valk Server

#8 Post by Major Marks »

Thanks Captain Obvious. The problem I'm having is getting NetRedirect.dll. It says on the SVN page you get it with xtools, but that still hadn't worked for me. Instead of pointing out the obvious, why not simply enlighten me on how to acquire it?

@bahng

Thanks very much. That one seems to be working just fine. <3

bahng
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 19:50
Noob?: Yes

Re: X Kore problem on Valk Server

#9 Post by bahng »

I don't remember what I did to it but yeah it seems to work fine O_O

Major Marks
Noob
Noob
Posts: 6
Joined: 03 Oct 2008, 09:05
Noob?: No

Re: X Kore problem on Valk Server

#10 Post by Major Marks »

Bump. Same result, different problem. Now when you load up the client, you get this error message :

Module Name: C:\Program Files\Gravity\RagnarokOnline\RagFree.exe
Time Stamp: 0x48c5e226 - Mon Sep 08 22:40:38 2008


Exception Type: 0xc0000005

0x004361a0 RagFree.exe
0x00684314 RagFree.exe
0x006a55b2 RagFree.exe
0x75ae4911 kernel32.dll
0x7725e4b6 ntdll.dll
0x7725e489 ntdll.dll

eax: 0x0012ff78 ebx: 0x00757b98
ecx: 0x00757b98 edx: 0x77279a94
esi: 0x00000000 edi: 0x0012fef8
ebp: 0x0012faa4 esp: 0x0012f9e8

stack 0012f9e8 - 0012fde8
0012F9E8 : 02 00 00 00 01 00 00 00 00 00 00 00 05 00 00 00
0012F9F8 : F8 FE 12 00 00 00 00 00 CC 1D 18 00 A3 C5 AE 75
0012FA08 : 06 00 00 00 EC F9 12 00 1C FA 12 00 78 FF 12 00
0012FA18 : 00 00 00 00 C8 78 05 0E CC 78 05 0E 54 FA 12 00
0012FA28 : 5C FA 12 00 F0 55 0E 77 5D 03 E7 14 44 FA 12 00
0012FA38 : CC 78 05 0E 00 00 00 00 54 FA 12 00 18 9C 0E 77
0012FA48 : 17 00 00 00 17 00 00 00 CC 78 05 0E 64 FA 12 00
0012FA58 : E9 00 0F 77 00 00 00 00 0C 16 00 00 9C FA 12 00
0012FA68 : C4 9C 0E 77 92 9C 0E 77 9D 03 E7 14 CC 78 05 0E
0012FA78 : 80 79 72 00 00 00 00 00 00 00 00 00 70 FA 12 00
0012FA88 : 00 00 00 00 78 FF 12 00 BA 51 13 77 99 65 FB 00
0012FA98 : 78 FF 12 00 9B 5C 6B 00 FF FF FF FF FC FE 12 00
0012FAA8 : 14 43 68 00 70 E0 71 00 05 00 00 00 00 00 00 00
0012FAB8 : 00 00 00 00 00 00 00 00 00 D0 FD 7F 01 03 20 02
0012FAC8 : 20 02 10 02 10 02 10 02 10 02 10 02 10 02 10 02
0012FAD8 : 00 00 00 00 00 00 9A 02 E8 1F 61 02 00 00 00 00

Launch Info
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000

Job : Novice

Config :


bindIp
# For an overview of all servertypes please go to the following URL:
# http://www.openkore.com/wiki/index.php/ ... pe#English
serverType 0

# 1 = hook into RO client, 2 = Act as stand-alone proxy, proxy = act as true proxy
XKore 1
XKore_silent 1
XKore_bypassBotDetection 0
XKore_exeName RagFree.exe

# XKore 2 / Proxy configuration
XKore_listenIp 127.0.0.1
XKore_listenPort 6901
XKore_publicIp 127.0.0.1

# It is not advised to set secureAdminPassword if you're using Xkore 2
secureAdminPassword 1
adminPassword tujistos
callSign
commandPrefix ;

pauseCharServer 0
pauseMapServer 0
ignoreInvalidLogin 0
secureLogin_requestCode

Post Reply