Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

Do you have a question or problem? Read this forum first! Someone has probably already asked the same thing in the past. Do not ASK questions here!

Moderators: Moderators, Documentation Writers

Message
Author
rrrrrohan
Noob
Noob
Posts: 2
Joined: 12 May 2008, 13:44
Noob?: Yes

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#11 Post by rrrrrohan »

as for no sp consumption, afaik thats a myth. i dont really see that happening for you! and the next poster, there are manuals all over the place which you can look at. there are some basic configuration blocks in this thread itself! otherwise you can go here www.openkore.com/wiki/index.php/Config.txt which might help out :)

ENZO
Noob
Noob
Posts: 1
Joined: 14 May 2008, 13:46
Noob?: Yes

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#12 Post by ENZO »

can some 1 help me?
My crusader's Gc can't be activate no matter what

my setting are:

attackSkillSlot Grand Cross {
lvl 10
dist 1
inLockOnly 0
disabled 0
monsters
aggressives
isSelfSkill 1
hp > 60%
sp > 20%
}

sky320rey
Human
Human
Posts: 27
Joined: 13 May 2008, 04:23
Noob?: No
Location: Here, There, Everywhere!

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#13 Post by sky320rey »

ENZO wrote:can some 1 help me?
My crusader's Gc can't be activate no matter what

my setting are:

attackSkillSlot Grand Cross {
lvl 10
dist 1
inLockOnly 0 <<<-----change to 1
disabled 0
monsters
aggressives
isSelfSkill 1
hp > 60%
sp > 20%
}

kdash01
Noob
Noob
Posts: 1
Joined: 01 Jun 2008, 10:03
Noob?: Yes

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#14 Post by kdash01 »

pwede po pagawa naman yung config ko ayaw gumana yung GC ng crusader ko sa pyrami po ako nag papa level.

Thanks

this is my config:

attackSkillSlot Grand Cross {
lvl 10
dist 1
inLockOnly 1
disabled 0
monsters > == kailangan pa ba ilagay yung monster name dito?
aggressives
isSelfSkill 1
hp > 60%
sp > 20%
}

chimoy
Noob
Noob
Posts: 1
Joined: 03 Jun 2008, 08:54
Noob?: Yes

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#15 Post by chimoy »

@kdash01
HUY BOBO INDE TOH PILIPINO SERvER..

@all

can any one figure which one Counter attack will be on?? attackskil or selfskill??

and can any one configure it to my knight?? vs nine tail

bulls01
Noob
Noob
Posts: 1
Joined: 03 Jun 2008, 09:26
Noob?: No

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#16 Post by bulls01 »

guys make me a gef_fild10 config with autoStorage,teleportAuto_idle,Two-Handed Skill just needed this...

geffen kafra - geffen 120 62

and after autoStorage takes 30 awaking potion and 5 butterfly wings auto...

and autoStorage after 49% weight...

thx... ^_^

openkore129
Human
Human
Posts: 44
Joined: 28 Apr 2008, 10:41
Noob?: No

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#17 Post by openkore129 »

attackSkillSlot Grand Cross {
lvl 10
dist 1
inLockOnly 1
disabled 0
monsters > == kailangan pa ba ilagay yung monster name dito?
aggressives
isSelfSkill 1
hp > 60%
sp > 20%
}
I don't understand filipino but you put monster names after monsters, not a condition. The condition goes after aggressives.
can any one figure which one Counter attack will be on?? attackskil or selfskill??
and can any one configure it to my knight?? vs nine tail
Why don't you try and see which one it is, and don't be stupid,lazy and ask for a readymade config.
guys make me a gef_fild10 config with autoStorage,teleportAuto_idle,Two-Handed Skill just needed this...

geffen kafra - geffen 120 62

and after autoStorage takes 30 awaking potion and 5 butterfly wings auto...

and autoStorage after 49% weight...

thx... ^_^
Yeah, people here have nothing to do but write your configs right? Read the manual.
1 Stupid question, plz help : where do i add these scripts?
Yes its a stupid question, read the manual.

knightofiris
Noob
Noob
Posts: 1
Joined: 03 Jul 2008, 08:57
Noob?: Yes

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#18 Post by knightofiris »

sheezz guys don't put knight characters to shame...read the manual, try to configure the code, if it doesn't work show ur code here and tell what are you trying to accomplish. I just found this program 3 days ago and I am really satisfied how this program works. Thanks for all of you who involved in this project =)

howlinghobo
Noob
Noob
Posts: 4
Joined: 06 Jul 2008, 03:57
Noob?: No

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#19 Post by howlinghobo »

jire wrote: useSelf_skill Berserk {
lvl 1
sp > 53%
onAction attack
whenStatusActive Aura Blade
whenStatusInactive
inLockOnly 1
notWhileSitting 1
notInTown 1
inInventory
}
it looks to me like the problem is that the bot is probably trying to use the skill with the skill still active, which of course you can't do

having no experience with berserking bots myself however I have no idea what should go behind whenStatusInactive, but if you fill that in with the kore name for berserk it should work

Reuel
Noob
Noob
Posts: 2
Joined: 23 Jun 2008, 04:34
Noob?: Yes

Re: Configuring Swordsmen/Knight/Crusader/Lord Knight/Paladin

#20 Post by Reuel »

here is wht i am go its successfully switches for whisper but not or bathories i.e default weapon

autoSwitch Whisper {
rightHand +5 VVS Fire Claymore
leftHand +5 VVS Fire Claymore
arrow
distance
useWeapon
}

autoSwitch Bathory {
rightHand +6 Bastard Sword [Hydra : Santa Poring*2 ] [3 ]
leftHand +6 Bastard Sword [Hydra : Santa Poring*2 ] [3 ]
arrow
distance
useWeapon
}

any and all help in configuring this is appreciated

Locked