Configuring Acolyte/Priest/Monk/High Priest/Champion

Do you have a question or problem? Read this forum first! Someone has probably already asked the same thing in the past. Do not ASK questions here!

Moderators: Moderators, Documentation Writers

Message
Author
WhoAmI
Noob
Noob
Posts: 2
Joined: 11 Mar 2009, 03:29
Noob?: No

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#61 Post by WhoAmI »

Not really understand what u are trying to say.

If the sprit <5,the bot already cast means its a fail bot.What i wants it to do currently is after finishing all 5 sprits only starts casting it again instead of casting 1 after finishing each spirits.

marshanlou
Noob
Noob
Posts: 4
Joined: 05 Dec 2008, 12:42
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#62 Post by marshanlou »

marshanlou wrote:
Hi All,

I have wizard that was placed in orcsdun02. I configure it to stay in one place and spam Storm Gust. I got problem when in comes to Priest who support my wizard. It seems that it didn't use buffs and heal to my wizard. I set my config for party skill as shown below:

partySkill Heal {
lvl 10
target_hp < 95%
sp > 10%
inLockOnly 0
}
partySkill Blessing {
lvl 10
sp > 10%
target_whenStatusInactive Blessing
inLockOnly 0
}

partySkill Increase AGI {
lvl 10
sp > 10%
notInTown 0
target_whenStatusInactive Increase AGI
}

The config stated above didn't work. I also tried putting a target to make my priest to use skill on specific character(Please look config below):

partySkill Heal {
lvl 10
target_hp < 95%
sp > 10%
target Vrind
inLockOnly 0
}

partySkill Blessing {
lvl 10
sp > 10%
target Vrind
target_whenStatusInactive Blessing
inLockOnly 0
}

partySkill Increase AGI {
lvl 10
sp > 10%
target Vrind
notInTown 0
target_whenStatusInactive Increase AGI

}

Niether putting a target didn't work.

I just want to know if there's someone who knows how to fix this problem? Any suggestion will very much appreciated.

Thanks and god bless,
marshanlou


is your wizard and the priest are parties?
if not, the priest wouldn't give a damn about your wizard..
Yes, my priest and wizard were party. It seems that the priest didn't buffs and heal the not moving party member.

bornfromnothing
Noob
Noob
Posts: 12
Joined: 11 Jun 2008, 07:34
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#63 Post by bornfromnothing »

hmm.. so u'r wizard just stand all the time using storm gust?
maybe u'r priest cannot see u'r wizard because he is not moving so u'r priest not receiving "wizard" packet..

try to add some x and y at u'r config

bornfromnothing
Noob
Noob
Posts: 12
Joined: 11 Jun 2008, 07:34
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#64 Post by bornfromnothing »

WhoAmI wrote:Not really understand what u are trying to say.

If the sprit <5,the bot already cast means its a fail bot.What i wants it to do currently is after finishing all 5 sprits only starts casting it again instead of casting 1 after finishing each spirits.
ow ic,, its really difficult to make that condition just with config, because useSelf_skill's block is limited

maybe u should try using macro..

marshanlou
Noob
Noob
Posts: 4
Joined: 05 Dec 2008, 12:42
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#65 Post by marshanlou »

bornfromnothing wrote:hmm.. so u'r wizard just stand all the time using storm gust?
maybe u'r priest cannot see u'r wizard because he is not moving so u'r priest not receiving "wizard" packet..

try to add some x and y at u'r config
Can you give n example on how to add to add some x and y in my config. Thanks

gyvanirelle
Noob
Noob
Posts: 1
Joined: 03 May 2009, 03:41
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#66 Post by gyvanirelle »

How can i make my Priest follow my other character? Is it automatic if i copy and paste the configuration of the Priest to my config? Help me please^^

MoG
Noob
Noob
Posts: 1
Joined: 11 May 2009, 06:28
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#67 Post by MoG »

I have a Monk combo and make it success rate about 2/10 - 4/10. No matter how I try the rate wont increase: set autoCombo 1, calculate the "wait time" by both forumlas, use macros and so on but it not work. I saw some1 can bot with his 8 Monks and can perform a complete combo at 8/10 - 9/10 success rate. The only thing I didnt try is using the 1.9.x version. Can any1 help me???

P/s: Sorry for my bad English

pRO
Noob
Noob
Posts: 1
Joined: 25 May 2009, 11:40
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#68 Post by pRO »

i im from philippines,
noob in world of botting,
can you please give me a complete configuration of a monk (going champ).
id like to use finger offensive skills to make it fast..
thx advance,il b waiting..

skripkid28
Noob
Noob
Posts: 1
Joined: 26 Nov 2008, 11:26
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#69 Post by skripkid28 »

i would like to ask how to configure a priest so that he will buffs my mercenary heres what i try but didnt work

monsterSkill Bless {
lvl 10
sp > 15
aggressives < 5
maxUses 5
target Elfin
target_dist 7,6,5,4,3
}

monsterSkill Increase Agi {
lvl 10
sp > 15
aggressives < 5
maxUses 5
target Elfin
target_dist 7,6,5,4,3
}

raikira143
Noob
Noob
Posts: 1
Joined: 27 May 2009, 08:45
Noob?: Yes

Re: Configuring Acolyte/Priest/Monk/High Priest/Champion

#70 Post by raikira143 »

where will i put the skills :?: :?: :?:

Locked