"xKore 1" doesn't work now

[pdagsm77]

Server:twRO
all twRO server can't use xKore 1 Mode
It will stuck at connecting map server
I tried change serverType but still not work
The login picture before select server now is OFF
and Openkore still work, just "xKore 1" doesn't work

[rwnath]

Is your client hexed?

[pdagsm77]

Is your client hexed?

Excuse me. What is "hexed" mean?

[valk123]

Is your client hexed?

if the client is hexed. that means you cannot use xkore?

[rwnath]

Is your client hexed?

if the client is hexed. that means you cannot use xkore?

you can only use xkore if your client is hexed.

Hexed meaning, gameguard is disabled

[EternalHarvest]

Hexed meaning, gameguard is disabled

"Modified" is more related.

[DrKN]

i am testing these days...
seems to be the client problem.

[DrKN]

i have tested but still dont get it..
XKore mode should let the RO client do the disconnect char server so the serverDisconnect() do nothing in this mode,
but seems the client is not disconnecting or connecting to map server correctly.
Now the situation is:
after choosing char, it should be connecting map server
but openkore console shows just listed the map server ip and port, char id but not going anymore.
i don think it is the servertype0 problem but the xkore.pm is not supporting renewal or the client binary is changed. I need more information on xkore mode. thankyou

[sofax222]

I have the same situation ! It disconnected after select char.

[sofax222]

Is your client hexed?

if the client is hexed. that means you cannot use xkore?

I use Xkore 1 with non-hexed RO client to twRO.
But it disconnected after selecting the char....., and then the RO client freeze !
Dosen't the "XKore 1" support the renewal ?