Openkore.com

It is my first time to use Openkore and i am completely lost.
I would like to run openkore for my Alchemist which has homunculus and get it to become loyalty.
I want to keep the Alchemist stationed and will only pick up specific items such as cards then go back to the same spot after it has picked up the items.
and auto feed the homunculus from hunger 11 to 24.

Please help me.

It is my first time to use Openkore and i am completely lost.
I would like to run openkore for my Alchemist which has homunculus and get it to become loyalty.
I want the Alchemist to not attack and to stay put on one spot and autofeed the homunculus.

Im not sure if i did it right but in my current set up, the player does not attack but walks towards the target which the homunculus is attacking and does not pick up items. I dont know how to make it so it will stay put and just let the homunculus exp farm and autofeed.

I configured lockmap to:
lockMap pay_dun00
lockMap_x27
lockMap_y34
lockMap_randX
lockMap_randY

But it does not seem to be doing what i want it to do. (which is to stay put)

Also, since my openkore will only be doing this type of activity, how likely will i get caught and banned?

Please help me.

#Updated.

http://wiki.openkore.com.br/index.php?t ... us_Feeding

Now only pick the cards...

viewtopic.php?f=28&t=3481

Need to read :

http://wiki.openkore.com/index.php/Pickupitems.txt

Updated.

Give a space.

I tried the string below.
lockMap_x 27
lockMap_y 34

It is much better now, but the character still follows the humonculus when attacking a far mob then goes back to the coordinates.
I want it to stay still and will only walk when picking up cards.

I used to use Openkore 3 years ago and i had the one with a minimap. Is it possible to get the current one with minimap?

1) http://wiki.openkore.com/index.php/Pickupitems.txt -> Set for card list
2) Set the correct distance. Reada th
You can set "sitAuto_idle 1" and set your attackAuto for 0. Now set itemsTakeAuto and itemsGatherAuto for 2 ! Should work fine bro :):):)
3) Check this line :

homunculus_attackMaxDistance 2.5

http://wiki.openkore.com/index.php/AttackMaxDistance

I did step 1 and step 2 and it seems to be picking up the correct items and returns to the coordinates but i dont think step 3 helped because the character still follows the homunculus.
I tried;
homunculus_attackMaxDistance 5
homunculus_attackMaxDistance 1

But both did not make any difference, the alchemist still follows the homunculus when it attacks a monster at a distance.

Here :

homunculus_followDistanceMin
homunculus_followDistanceMax

Set the distance for example, you sit in 27/34 (x/y) and the screen goes to 35/42 for example, set for 8 the max. And the min could be 1 or 0, you decide.

Thank you for the constant attempt to help me, i really appricate it.

My defualt config was:


I then tried what you suggested:


But the character still follows the homunculus when it goes too far.
I really hope that http://wiki.openkore.com was more descriptive.

I think what needed to be configured is the main configuration and not the homunculus config.
Im looking into some of the settings in the manual but it would be great to get further help from you at the same time as you are more knowledgable.
Thanks

Update:
i found a thread that could possibly hold a solution
viewtopic.php?f=16&t=144757

The bottom post suggests the 'setting the homunculus_followDistanceMax to the same or higher then the homunculus_route_step', i haven't tried this yet but i will try it tomorrow morning and see if it works. Otherwise, i would like to know your opinion to this.

This seems to be working now, the alchemist no longer wonder.
My only concern now is if the bot will pick up cards with the new configuration i have.