idRO Not Working after 27-01-2010 | All Version
Moderators: Moderators, Developers
-
- Human
- Posts: 27
- Joined: 29 Jun 2009, 10:45
- Noob?: No
- Location: IdRO, FnC, Payon, -AutoWarper- Headquarters
Re: idRO Not Working after 27-01-2010 | All Version
Update 10-3-2010 : Just as harry84 says....
Here is the new ragexe.exe and xyz.cfg (xyz.dll also included)
And here is the new screenshot :
Here is the new ragexe.exe and xyz.cfg (xyz.dll also included)
And here is the new screenshot :
Re: idRO Not Working after 27-01-2010 | All Version
Well. I made something....
The Imports are restored, but!!!
there is 5 Functions that are running using VM.
thus are:
tGsEncrypt::Encrypt
tGsEncrypt::Decrypt
tChecker::Main
madCodeHook::Unknown1
madCodeHook::Unknown2
So.. I was wrong in the first Place.
Anyone wonna Help????
The Imports are restored, but!!!
there is 5 Functions that are running using VM.
thus are:
tGsEncrypt::Encrypt
tGsEncrypt::Decrypt
tChecker::Main
madCodeHook::Unknown1
madCodeHook::Unknown2
So.. I was wrong in the first Place.
Anyone wonna Help????
Re: idRO Not Working after 27-01-2010 | All Version
i have no idea about it. i only knew that madCodeHook is a code hooker -_-a
Re: idRO Not Working after 27-01-2010 | All Version
This was the temporary solution openkore to idro until xyz.dll could be solved.
This method could be considered to be quite stupid, but at least openkore could be run.
Earlier I didn’t share this method, because according to me was not yet the perfect solution.
So I only tell to several people that according to me could in believed and he would not share to others.
This method rather was difficult, because needed "tabel" that must be updated continually.
The belief remained at the belief, the friend ate the friend.
After he knew how got “tabelâ€, he then began sold openkore.
Possibly several people already known who sold this program.
In fact he was a moderator in the oficial forum lytogame.
So I thought better the user openkore in idro knew this method.
open functions.pl find:
add after:
in last line before
add before:
this is temporary solution for 10maret until next maintenance.
after maintenance, the tabel will change.
in next post i will tell how to find the tabel.
This method could be considered to be quite stupid, but at least openkore could be run.
Earlier I didn’t share this method, because according to me was not yet the perfect solution.
So I only tell to several people that according to me could in believed and he would not share to others.
This method rather was difficult, because needed "tabel" that must be updated continually.
The belief remained at the belief, the friend ate the friend.
After he knew how got “tabelâ€, he then began sold openkore.
Possibly several people already known who sold this program.
In fact he was a moderator in the oficial forum lytogame.
So I thought better the user openkore in idro knew this method.
open functions.pl find:
Code: Select all
if (defined($data) && length($data) > 0) {
Code: Select all
if ($net->getState() < 2){
$data = idro_decrypt($data);
}
Code: Select all
return 1;
Code: Select all
sub idro_decrypt {
my $data = shift;
my $data2 = "";
my @tabel = split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
my @hex = split / *\ + */,getHex($data);
for (my $i=0;$i < @hex; $i++) {
$data2 .= giveHex($tabel[hex($hex[$i])]);
}
return $data2;
}
after maintenance, the tabel will change.
in next post i will tell how to find the tabel.
Re: idRO Not Working after 27-01-2010 | All Version
it's nice to see that someone want to contribute another idea
Re: idRO Not Working after 27-01-2010 | All Version
this is the way to get "tabel"
first we capture the packet via ethernet
we cannot use wireshark because xyz.dll block winpcap
so we can use other sniffer, for exaple use Socket Sniffer
the second packet capture by using WPE
xyz block WPE too, but if we rename the dll, we can use for 2~5 second
that enough for getting packet start with DC 01
ok let start
- run ragexe.exe fill username and password (do not enter yet)
- run socket sniffer, select ragexe.exe process and start capture
- run wpe, select ragexe.exe process, and start capture
- return to ragexe.exe dan press enter
now we get data like this
packet data 91 7F is from socket sniff and packet data DC 01 is from WPE
do it continously until we get 100 packet+
collect all data, and save into file data.txt
continue ....
first we capture the packet via ethernet
we cannot use wireshark because xyz.dll block winpcap
so we can use other sniffer, for exaple use Socket Sniffer
the second packet capture by using WPE
xyz block WPE too, but if we rename the dll, we can use for 2~5 second
that enough for getting packet start with DC 01
ok let start
- run ragexe.exe fill username and password (do not enter yet)
- run socket sniffer, select ragexe.exe process and start capture
- run wpe, select ragexe.exe process, and start capture
- return to ragexe.exe dan press enter
now we get data like this
Code: Select all
91 7F 48 96 FB A5 BF 75 56 BD BA 48 71 B2 CC B8 4D 93 53 C9
DC 01 14 00 52 B5 A9 A8 87 06 28 14 CE D5 0E A5 8C 83 88 E8
91 7F 48 96 79 4C C0 04 FC 11 BE 54 9B 37 70 8B 54 C5 6C CE
DC 01 14 00 96 02 72 34 2C 3B 17 99 43 68 81 CB 99 D9 0F BE
do it continously until we get 100 packet+
collect all data, and save into file data.txt
continue ....
Re: idRO Not Working after 27-01-2010 | All Version
Code: Select all
#!/usr/bin/env perl
# Syntax:
# mapper.pl <namafile> <hex1> <hex2>
#
# namafile : file yang berisi data hexa hasil capture
# hex1 : hexa pertama yang sejajar dengan DC
# hex2 : hexa kedua yang sejajar dengan 01
use strict;
package App;
my %hasil;
my @hex1;
my @hex2;
open FILE, "< $ARGV[0]";
open FILE2, "> result.txt";
foreach (<FILE>) {
$_ =~ s/^\s+//;
$_ =~ s/\s+$//;
if (/^$ARGV[1] $ARGV[2]/) {
my @hexx = split / *\ + */, $_;
foreach (@hexx) {
$_ =~ s/^\s+//;
$_ =~ s/\s+$//;
push (@hex1,uc($_));
}
} elsif (/^DC 01/) {
$_ =~ s/^\s+//;
$_ =~ s/\s+$//;
my @hexx = split / *\ + */, $_;
foreach (@hexx) {
$_ =~ s/^\s+//;
$_ =~ s/\s+$//;
push (@hex2,uc($_));
}
}
}
my $count = @hex1;
for (my $i=0 ; $i<@hex1;$i++) {
if ((defined $hasil{$hex1[$i]}) && ($hasil{$hex1[$i]} != $hex2[$i])){
print "Ada data yang salah $hex1[$i] $hasil{$hex1[$i]}\n";
}
$hasil{$hex1[$i]} = $hex2[$i];
}
my $i=0;
foreach my $key (keys %hasil) {
$i++;
}
print "$i key dari 256\n";
for (my $i=0;$i<256;$i++) {
my $key2 = uc(sprintf("%.2x",$i));
print "$hasil{$key2} ";
print FILE2 "$hasil{$key2} ";
if ($i % 26 == 25) {print "\n";}
}
close FILE;
close FILE2;
Code: Select all
C:\>mapper.pl data.txt 91 7F
after that, we get file result.txt that contain a new table of decyption
remember, you must get 256 keys
if less then 256, you must get another capture packet from socket sniff+wpe
the end
Re: idRO Not Working after 27-01-2010 | All Version
PERFECTO! God Bless You Toxcil!
~~~
Above all power above all kings
Above all nature and All Created things
Above all wisdom and all the ways a man
You were her before The World begin
~~~
Above all power above all kings
Above all nature and All Created things
Above all wisdom and all the ways a man
You were her before The World begin
~~~
Re: idRO Not Working after 27-01-2010 | All Version
ToXcil
it`s work,GBU
it`s work,GBU
Re: idRO Not Working after 27-01-2010 | All Version
Hmm... Translation Table? Translation table have just one rule: key's must not be duplicated.
The thing that this algo do not support is the UDP Handshake and key exchange.
This way they can find you, and ban easily.
The thing that this algo do not support is the UDP Handshake and key exchange.
This way they can find you, and ban easily.