Any Update for the new pRO Update 10/27/11?

[xiah]

http://openkore.collectskin.com/

http://sourceforge.net/projects/openkor ... /OpenKore/

[josejesusvergara4]

use the latest Openkore SVN

a. go to tables folder
b. servers.txt
c. change charblocksize from 112 to 116
d. back to tables folder
e. find mRO folder
f. copy receivepackets.txt then paste to desktop
g. rename receivepackets.txt (on your desktop) to receivepackets-valkyrie.txt
h. go to tables>pRO folder
i. then Copy receivepackets-valkyrie.txt from desktop; replace the old one

Actually i use iRO revpackets. xD and its working just fine... don't forget to have backup of ur revpackets first!

^ you can follow this one

[martnevado]

Finally Got it working!!

Thanks Bladeluck!

Here is How:

1. Open tables/servers.txt
2. Search for the server that you are using (it will be a bit hard. just use CTRL+F then type the server you are using for easy search.)
3. Once you have found your server, for example:

[Philippines - pRO: New Loki]
ip 202.57.117.94
port 6900
master_version 15
version 1
secureLogin 1
secureLogin_type 0
secureLogin_requestCode
secureLogin_account 0
serverType pRO
patchserver wpatch.ragnarok.com.ph
patchpath /patch50
storageEncryptKey 0x050B6F79, 0x0202C179, 0x0E20120, 0x04FA43E3, 0x0179B6C8, 0x05973DF2, 0x07D8D6B, 0x08CB9ED9
serverEncoding Tagalog
charBlockSize 116
gameGuard 1
recvpackets recvpackets-valkyrie.txt
addTableFolders pRO

4. Replace the charBlockSize value from 112 to 116
3. Change also the charBlockSize value inside your control/config.txt to 116 if it has not yet changed after altering the value inside your servers.txt. (both charBlockSize inside servers.txt and config.txt should have a value of 116)
5. Open iRO folder inside the tables folder, Copy the recvpackets.txt and paste it somewhere (i pasted it on my desktop)
6. rename recvpackets.txt to recvpackets-valkyrie.txt
7. Copy the recvpackets.txt from your desktop (or wherever you pasted it) and copy it into tables/pRO thus replacing the old recvpackets-valkyrie.txt. (make a backup of your original recvpackets-valkyrie.txt before replacing it)
9. run OpenKore and enjoy botting!

[subkristen]

^ Buggy inventory and equipment... CHECK it out.

[martnevado]

^ Buggy inventory and equipment... CHECK it out.

hmm..mine works just fine..

[chronos]

i've got valhalla bot working.. tho the inventory and eq is bugged its better than nothing..

just copy the recvpackets.txt of iRO folder, (dont rename it)

paste it to pRO folder.

for valhalla server only..

[troll]

for valhalla, charblocksize is still 112.

[fallebn123]

^ Buggy inventory and equipment... CHECK it out.

just the equipment...just ignore that...at least the bot is working..

[Bladeluck]

Just downloaded the latest svn...

and i was able to extract the packets from my selfly made unpacked client...

first i used it in my old svn... it still has bugged equipment and inventory... hopefully the latest will solve my problem.

BTW i found this guide helpful credit to kLab
http://forums.openkore.com/viewtopic.ph ... +extractor

[zexel0014]

Just downloaded the latest svn...

and i was able to extract the packets from my selfly made unpacked client...

first i used it in my old svn... it still has bugged equipment and inventory... hopefully the latest will solve my problem.

BTW i found this guide helpful credit to kLab
http://forums.openkore.com/viewtopic.ph ... +extractor

how do u extract the recvpackets? can you tell me how?