DivinityRO | Connection denied after login server.

[Nalani]

Hello everyone.


OpenKore ver:
openkore_ready(latest SVN ver.)
The main problem is:
I have a sizable and confusing problem with connecting to the server.

After reading the FAQ I figured that there must be a wrong diagnosis ServerType

[DivinityRO]
ip 206.217.134.2
port 6950
private 1
master_version 14(I checked it and it looks correct)
version 25
serverType kRO_RagexeRE_2010_06_08a
serverEncoding Western
addTableFolders translated/kRO_english;kRO


Important(This confusing me alot)
OpenKore currently connects to the server only ServerType 8, but it gets information about *FAQ*6.6 Packet Parser Error: Unknown switch: xxxx and *FAQ"6.1 NPCs and monsters are shown as "Unknown #xxxxxxxx" problems.
I also have a current recvpackets.txt(taken from the server client) file in the table folder.
If anyone has the knowledge to solve my problem, it would be great.

Thanks Nalani.

[SkylorD]

Have you extracted recvpackets.txt ?

Follow this guide :

http://www.openkore.com/index.../Connectivity_Guide

Use JCV RO Tools &/or V3 to extract recvpackets.
Probably yes, homewever :

Use PEViewer to find the correct serverType.

Good luck !

Other question, this server have any shield ?

[suggipuss]

i have the same problem as you nalani.. if you figure it out plz help me too.. i tried servertype 8_1 to 8_5 but they dont seem to work as well.. when i use the PEviewer i get the same date as nalani.. i have tried some other dates as well already.. but none worked
i have also already updated my recvpackets using jcv ro tool, but still the same problem.

I had the same problem as you, but i figured it out.. the server.txt that you have is correct, but you should try to edit the recvpackets again until it works.. that did it for me, but the problem i have now is the charblocksize.. i cant figure out which one to use.. i tried 106, 108, 112, 116 and even the renewal ones, but it doesnt seem to work.. if i use 108 then openkore can read my first characters name and lvl correctly, but all the other ones are wrong.. thats as close as i have gotten.. perhaps anyone knows how to fix this?

i hope someone can help us ^^

[SkylorD]

i have the same problem as you nalani.. if you figure it out plz help me too.. i tried servertype 8_1 to 8_5 but they dont seem to work as well.. when i use the PEviewer i get the same date as nalani.. i have tried some other dates as well already.. but none worked
i have also already updated my recvpackets using jcv ro tool, but still the same problem.

I had the same problem as you, but i figured it out.. the server.txt that you have is correct, but you should try to edit the recvpackets again until it works.. that did it for me, but the problem i have now is the charblocksize.. i cant figure out which one to use.. i tried 106, 108, 112, 116 and even the renewal ones, but it doesnt seem to work.. if i use 108 then openkore can read my first characters name and lvl correctly, but all the other ones are wrong.. thats as close as i have gotten.. perhaps anyone knows how to fix this?

i hope someone can help us ^^

Your topic was trashed = Same doubt.

Follow my tip, and do not expect a solution from the author.
Use charBlockSize 112.
And for the rest, I said.