Hi everyone,
Thanks for taking the time to read. The Increase AGI skill no longer works properly after the update.
First was the character problem so I went ahead to redownload openkore and it solved this first issue.
However, my new acolyte, that uses the same settings recommended priest setting found in openkore, does not cast increase agi on itself (It used to work fine on my priest that got banned)
Note that other skills such as heal, blessing, auto storage/sell works perfectly fine.
I tried searching for an answer and tweaking the settings in many different ways (e.g using different templates that people recommended in the forum, created a party in hopes that it'll consider myself part of the party to buff and so forth)
Does anyone have a solution for it? Here are my settings.
lockMap prt_fild07
lockMap_x
lockMap_y
lockMap_randX
lockMap_randY
sitAuto_hp_lower 15
sitAuto_hp_upper 80
sitAuto_sp_lower 10
sitAuto_sp_upper 100
sitAuto_follow 0
sitAuto_over_50 0
sitAuto_idle 1
sitAuto_look
sitAuto_look_from_wall
sitTensionRelax 0
statsAddAuto 1
statsAddAuto_list 10 agi, 30 dex, 40 int
statsAddAuto_dontUseBonus 0
statsAdd_over_99 0
#attackSkillSlot Heal {
lvl 1
sp >60%
monsters Whisper,Hydra, Familiar, Drainliar, Arclouse, Gargoyle, Parasite, Dragon Tail, Alligator, Alarm, Rideword, High Orc, Orc Archer, Brilight, Grand Peco,Geographer,Stalactic Golem, Megalith,Drops,Flora
inLockOnly 0
timeout 0
}
#attackSkillSlot Turn Undead {
lvl 1
dist 8
maxCastTime 0
minCastTime 0
hp
sp >60%
inLockOnly 0
monsters Whisper,Hydra, Familiar, Drainliar, Arclouse, Gargoyle, Parasite, Dragon Tail, Alligator, Alarm, Rideword, High Orc, Orc Archer, Brilight, Grand Peco,Geographer,Stalactic Golem, Megalith,Drops,Flora
maxUses 1
disabled 0
}
#attackSkillSlot Magnus Exorcismus {
lvl 1
dist 8
sp >60%
inLockOnly 0
monsters Whisper,Hydra, Familiar, Drainliar, Arclouse, Gargoyle, Parasite, Dragon Tail, Alligator, Alarm, Rideword, High Orc, Orc Archer, Brilight, Grand Peco,Geographer,Stalactic Golem, Megalith,Drops,Flora
maxUses 1
disabled 0
inInventory Holy Water
}
#attackSkillSlot Holy Light {
lvl 1
dist 8
maxCastTime 0
minCastTime 0
hp
sp >60%
inLockOnly 0
monsters Whisper,Hydra, Familiar, Drainliar, Arclouse, Gargoyle, Parasite, Dragon Tail, Alligator, Alarm, Rideword, High Orc, Orc Archer, Brilight, Grand Peco,Geographer,Stalactic Golem, Megalith,Drops,Flora
maxUses 1
disabled 0
}
attackComboSlot {
	afterSkill
	waitBeforeUse
	dist 1.5
	isSelfSkill 1
	target_hp
	target_deltaHp
	monsters
	notMonsters
	monstersCount
}
doCommand {
	hp
	sp
	homunculus_hp
	homunculus_sp
	homunculus_dead
	onAction
	whenStatusActive
	whenStatusInactive
	whenFollowing
	spirit
	amuletType
	aggressives
	monsters
	notMonsters
	monstersCount
	stopWhenHit 0
	inLockOnly 0
	notWhileSitting 0
	notInTown 0
	timeout
	disabled 0
	inInventory
	inCart
	inMap
	manualAI 0
}
useSelf_skill {
	lvl 10
	maxCastTime 0
	minCastTime 0
	hp
	sp
	homunculus_hp
	homunculus_sp
	homunculus_dead
	onAction
	whenStatusActive
	whenStatusInactive
	whenFollowing
	spirit
	amuletType
	aggressives
	monsters
	notMonsters
	monstersCount
	stopWhenHit 0
	inLockOnly 0
	notWhileSitting 0
	notInTown 0
	timeout 0
	disabled 0
	inInventory
	manualAI 0
}
useSelf_skill Heal {
	lvl 10
	hp < 20%
	sp > 10%
}
useSelf_skill Increase AGI {
	lvl 10
	whenStatusInactive Increase AGI
	sp > 10%
	timeout 5
}
useSelf_skill Cure {
	lvl 1
	whenStatusActive Cursed, Blinded, Chaos, Silenced
	sp > 10%
	timeout 5
}
useSelf_skill Blessing {
	lvl 10
	whenStatusInactive Blessing
	sp > 10%
	timeout 5
}
useSelf_skill_smartHeal 1
partySkillDistance 0..8
partySkill {
	lvl 10
	dist 3
	maxCastTime 0
	minCastTime 0
	hp
	sp
	homunculus_hp
	homunculus_sp
	homunculus_dead
	onAction
	whenStatusActive
	whenStatusInactive
	whenFollowing
	spirit
	amuletType
	aggressives
	monsters
	notMonsters
	monstersCount
	stopWhenHit 0
	inLockOnly 0
	notWhileSitting 0
	notInTown 0
	timeout 0
	disabled 0
	manualAI 0
	target
	target_hp
	target_isJob
	target_isNotJob
	target_whenStatusActive
	target_whenStatusInactive
	target_aggressives
	target_monsters
	target_timeout 0
	target_deltaHp
	target_dead 0
	inInventory
	isSelfSkill 0
}
partySkill Increase AGI {
	lvl 10
	sp > 45
	notInTown 0
	timeout 3
	target_whenStatusInactive Increase AGI
	target_timeout 240
}
partySkill Angelus {
	lvl 10
	sp > 45
	notInTown 1
	timeout 3
	target_whenStatusInactive Angelus
	target_timeout 240
	isSelfSkill 1
}
partySkill Cure {
	lvl 1
	target_whenStatusActive Cursed, Blinded, Chaos, Silenced
	sp > 10%
	timeout 5
}
Thanks for your time and help! Have a wonderful day ahead!
			
			
									
						
										
						Increase Agi on an Acolyte not working after the update
Moderator: Moderators
- 
				Geraldongsl
 - Noob

 - Posts: 2
 - Joined: 24 Feb 2017, 08:36
 - Noob?: Yes
 
- 
				Palimbo
 - Noob

 - Posts: 3
 - Joined: 20 Feb 2017, 15:08
 - Noob?: No
 
Re: Increase Agi on an Acolyte not working after the update
If i copy your code into my config.txt it works on IRo so thats not the Problem. 
Refrehs your open kore!
Best way is you load it with the windows git Hub programm because after that you can sync it everday and dont need to replace complete open kore!
			
			
									
						
										
						Refrehs your open kore!
Best way is you load it with the windows git Hub programm because after that you can sync it everday and dont need to replace complete open kore!
- 
				Geraldongsl
 - Noob

 - Posts: 2
 - Joined: 24 Feb 2017, 08:36
 - Noob?: Yes
 
Re: Increase Agi on an Acolyte not working after the update
Hmmm strange... Thanks for the advice, how do I load it with the github program? I've no idea how to get it. (Sorry for the noob question
			
			
									
						
										
						- 
				Palimbo
 - Noob

 - Posts: 3
 - Joined: 20 Feb 2017, 15:08
 - Noob?: No
 
Re: Increase Agi on an Acolyte not working after the update
Download Git hub and i think you need to create a account @ github site
after that you can click on the right corner for Repository settings and then go to remote and insert the open core dir adress https://github.com/OpenKore/openkore.git
			
			
									
						
										
						after that you can click on the right corner for Repository settings and then go to remote and insert the open core dir adress https://github.com/OpenKore/openkore.git